Kodak easyshare 5300 Manuale Utente

Chapter 8 

Printer access door open 
Close the printer access door. 

The Printer access Door on the 
top of the printer is open while 
printing. 

Close the Printer Access Door. 

 

Scan operation failed. Please try 
again. 

Scan operation initiated from the 
printer fails to communicate with 
the computer within a timeout 
period. The computer was 
supposed to start the scan 
operation. 

Retry the scan operation. 

 

Bluetooth connection lost.  
Check connection and resend. 

Bluetooth 
communication/connection 
dropped while downloading a file 
to the printer.  

Check the connection and 
resend. 

Troubleshooting 

AiO Fails to Power On 

The power supply is not properly connected. 

1   

Make sure the power cord is connected to the power supply and plugged into a grounded power outlet 

or power strip. 

2   

If you are using a power strip, make sure it is turned on. 

3   

If you are using a switched power outlet, make sure the switch is on. 

4   

Make sure the power outlet is supplying power. 

5   

If none of the above corrects the problem, contact Kodak support. 

Bluetooth Device not Recognized 

Probable Cause 1 

The internal Bluetooth radio in the device may be turned off. 

Corrective Action 

Make sure the device is on and within range of the Bluetooth radio signal (30 ft., or 10 meters). 

NOTE:  The Bluetooth technology enabled device must use an BIP, OPP, or FTP profile. 

86 

Kodak EasyShare 5300 AiO