National Instruments 653X Manuale Utente

© National Instruments Corporation

To download a free copy of the most recent version of NI-DAQ, click 
Download Software at 

ni.com

. Find NI-DAQ compatibility for your 

device using the following table:

Install application development software, such as LabVIEW or 
Measurement Studio, according to instructions on the CD and the release 
notes. If NI-DAQ was not installed with your ADE, then install NI-DAQ 
according to the instructions on the CD and the DAQ Quick Start Guide 
included with your device.

It is important to install the NI-DAQ driver software before installing your device(s) 

to ensure the device(s) are properly detected.

Unpacking Your 653X Device

Your 653X device is shipped in an antistatic package to prevent 
electrostatic damage to the device. To avoid such damage in handling the 
device, take the following precautions:

•

Ground yourself via a grounding strap or by holding a grounded object.

•

Touch the antistatic package to a metal part of your computer chassis 
before removing the device from the package.

Never touch the exposed pins of connectors to prevent electrostatic discharge 

from damaging the device.

PCI-DIO-32HS 

Version 5.0 or later

Version 6.1.0 or later

AT-DIO-32HS

Version 5.0 or later

N/A

PXI-6533

Version 5.1 or later

Version 6.1.3 or later

DAQCard-6533 for PCMCIA

Version 5.1 or later

Version 6.1.0 or later

PXI-6534

Version 6.9 or later

N/A

PCI-6534

Version 6.9 or later

N/A

PCI or PXI-7030/6533

Version 6.5.2 or later

N/A