Hoyt compound-2000 Manuale Utente
12
Warning!
On some shorter axle to axle models
adjustable cable guard bars can be off-set too
much causing the cable to track off the cam.
This can cause damage to the bow or personal
injury. To prevent this from happening NEVER
SET THE BAR AT THE THREE O’ CLOCK
POSISTION.
much causing the cable to track off the cam.
This can cause damage to the bow or personal
injury. To prevent this from happening NEVER
SET THE BAR AT THE THREE O’ CLOCK
POSISTION.
CABLE GUARD INSTALLATION (TWO
CAM MODELS)
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on two cam model bows make sure
that when the cables are inserted into the glide
the shorter slot is closer to the grip and the
longer slot is closer to the end of the cable
guard bar. (See fig 8)
Note: On bows with high mount bars installa-
tion may be opposite of above.
CAM MODELS)
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on two cam model bows make sure
that when the cables are inserted into the glide
the shorter slot is closer to the grip and the
longer slot is closer to the end of the cable
guard bar. (See fig 8)
Note: On bows with high mount bars installa-
tion may be opposite of above.
CABLE GLIDE INSTALLATION (SINGLE
CAM MODELS)
On single cam models install the glide opposite
from the two cam method so that the longer
slot is closer to the grip and the shorter slot is
closer to the end of the cable guard bar. (See fig
8)
This will ensure that contact is minimized
between cables at the point where they cross.
CAM MODELS)
On single cam models install the glide opposite
from the two cam method so that the longer
slot is closer to the grip and the shorter slot is
closer to the end of the cable guard bar. (See fig
8)
This will ensure that contact is minimized
between cables at the point where they cross.