Kenwood TS-570S TS-570D Manuale Utente
54
12 OPERATOR CONVENIENCES
■
Sending Messages
1 Select SSB, FM, or AM.
•
Use the same mode for transmitting and
receiving.
receiving.
2 Press [VOX] to switch VOX ON or OFF.
•
Depending on this selection, the subsequent
procedures differ.
procedures differ.
3 If you switch OFF VOX in step 2, press [SEND],
or press and hold Mic [PTT].
4 Press [CH 1], [CH 2], or [CH 3], depending on
which channel you want to use.
•
For example, “AP 1– –” appears while
playing back the message in channel 1.
playing back the message in channel 1.
•
To interrupt playback, press [CLR].
5 To play back another message in sequence,
press the corresponding [CH 1], [CH 2], or
[CH 3] while playing back the first message.
[CH 3] while playing back the first message.
•
Up to three channels can be queued at the
same time.
same time.
6 If you press [SEND] or Mic [PTT] in step 3, press
[SEND] again or release Mic [PTT].
■
Changing Inter-message Interval
For repetitive message playback, you can change
the interval between each series of messages. Use
Menu No. 24, and select the time in the range of 0 to
60 seconds.
the interval between each series of messages. Use
Menu No. 24, and select the time in the range of 0 to
60 seconds.
■
Changing Volume
Turning the AF control does not change the volume
for playback. To change the volume, use Menu
No. 25.
for playback. To change the volume, use Menu
No. 25.