Kenwood TK-8180 Manuale Utente

20

■ D

1 Press the key programmed as Autodial.

• The first entry in the Autodial list appears on the display.

2 Press the   and   or <B and C> keys or press the appropriate DTMF key

to select your desired Autodial list number (01 ~ 32).

• The stored entry appears on the display.

3 Press the PTT switch to make the call.

■ C

1 Press the key programmed as Autodial Programming.

2 Press the   and   or <B and C> keys, or press the appropriate DTMF

key to select your desired Autodial list number (01 ~ 32).

3 Press the A or DTMF # key.

• “

” appears on the display after confirming the entered number.

4 Press the S or DTMF

key to delete the entry from the Autodial list.

• The selected memory location is cleared.

You can redial the last number you transmitted.

Note:  To redial a number, you must use an optional microphone with a DTMF keypad.

1 Press the key programmed as Autodial.

• The first entry in the Autodial list appears on the display.

2 Press the DTMF

key followed by the DTMF 0 key to display the last called

number.

3 Press the PTT switch to make the call.

Note:  Turning OFF the transceiver power clears the redial memory.

Note:  To transmit connect/ disconnect IDs, you must use an optional microphone with a DTMF
keypad.

1 Press the key programmed as Autodial.

• The first entry in the Autodial list appears on the display.

2 Connect ID:  Press the DTMF

key two times.

Disconnect ID:  Press the DTMF

key followed by the DTMF # key.

3 Press the PTT switch to make the call.