KYOCERA taskalfa fs-1100 Manuale Utente

Loading Paper

2-9

Fan the stack of paper and align the edges before loading them in the 
MP tray. Some types of paper have rough edges on the back (those are 
created when the paper is cut). In this case, put the paper on a flat place 
and rub the edges once or twice with, for example, a ruler to smooth 
them. Feeding rough edged paper may cause paper jams.

Colored paper should satisfy the same conditions as white bond paper. 
Refer to Paper Specifications on page 2-2. In addition, the pigments 
used in the paper must be able to withstand the heat of fusing during the 
printing process (up to 200°C or 392°F).

Preprinted paper should satisfy the same conditions as white bond 
paper. Refer to Paper Specifications on page 2-2.The preprinted ink 
must be able to withstand the heat of fusing during the printing process, 
and must not be affected by silicone oil.

Do not use paper with any kind of surface treatment, such as the type of 
paper commonly used for calendars.

Select recycled paper that meets the same specifications as the white 
bond paper except for whiteness. Refer to Paper Specifications on 
page 2-2.

If the paper jams 

even after you smooth it 
out, load the paper in 
the MP Tray with the 
leading edge raised up 
a few millimeters as 
shown in the 
illustration.

Before purchasing recycled paper, test a sample on the 

machine and check that the printing quality is satisfactory.