Kenwood fleetsync tk-890 Manuale Utente

16

You can make DTMF calls using the optional KMC-28 DTMF microphone.
■

To dial a number manually:

1 Press and hold the PTT switch.

• If Keypad Auto PTT is enable, you do not need to press the PTT switch (please

consult your dealer for enabling this function).

2 Press the desired DTMF keys.

■

A maximum of 16 digits can be redialed.  The last number dialed, either
manually or automatically, will be redialed.

To redial a number:

1 Press the     key.

• An “A” will appear on the display.

2 Press the 0 key.

• The transceiver will redial the last number, and the digits will appear on the

display.

  If the transceiver power is switched OFF, the redial memory will be erased.

■

  Auto dialing is either enabled or disabled by your dealer.

To store a number in memory:

1 Press the 

 key.

• A “D” will appear on the display.

2 Press the desired DTMF keys to enter a maximum of 16 digits.

• Press and hold the PTT switch, then press 2, 5, 8, 0,     , or 

 to enter A, B, C,

D,     , or 

 (respectively).

3 Press the 

 key.

4 Select the desired memory channel by pressing a DTMF key (1 ~ 9).

• The number entered in step 2 will be stored in the memory channel selected.