Konica Minolta 7013 psc Manuale Utente
Troubleshooting-3
8.2
Status Report
The Status/Configuration report is sent as a print job to the printer when the print
server is powered on. For example, the report on the next page shows the configura-
tion of the print server immediately before the report is printed. Some printers also
allow you to use a command from the front panel that will produce a status report.
server is powered on. For example, the report on the next page shows the configura-
tion of the print server immediately before the report is printed. Some printers also
allow you to use a command from the front panel that will produce a status report.
It is strongly recommended that you review this report immediately after installation
and any time the setup has been changed. If the report does not include a protocol that
was configured, check that the procedure was done properly.
and any time the setup has been changed. If the report does not include a protocol that
was configured, check that the procedure was done properly.