Konica Minolta 7013 psc Manuale Utente
NetWare Configuration-4
4. Choose the printer and press the return key. The Printer 0 Configuration screen
appears with a title of Printer 0.
5. If you choose to, change default in the Name field on this form to something that
helps you identify the printer, for example, LASER_PRINTER. The print server
uses this name in its message back to the users on the Notify list. Select Name,
enter a name, and then press the return key.
6. Select Type and press the return key. A list of printer types is displayed. Choose
Remote Other/Unknown and press the return key. This creates default entries in
the other fields. These defaults are usually optimal, so do not change them without
specific knowledge of the effects.
7. Press the ESC key. At the prompt, choose to save your changes.
8. Press the ESC key to return to the Print Server Configuration menu.
4.1.5 Assign Print Queues to the Printer
When you assign queues to the defined printer, you authorize the print server to ser-
vice these queues.
vice these queues.
Note:
Do not assign the same queue to two different print servers. If a queue is assigned
to multiple print servers, print jobs may not go to the intended printer.
1. Choose Queues Serviced By Printer from the Print Server Configuration menu.
2. Select the printer name from the list of defined printers.
3. Press the RETURN key to display the Available Queues list for the printer.
4. Select the queue you want and then assign a priority level from 1 to 10. It is rec-
ommended that you accept the default priority level. Press the RETURN key. The
queue appears on the list for the printer.
Press the RETURN key again to assign additional queues.
5. When you finish assigning queues, press the ESC key and then save your changes.
Continue to press the ESC key to return to the Print Server Configuration menu. If
you want to set Notify options, go to Section. 4.1.6. If you are finished, continue
to press the ESC key and then save your changes.