Konica Minolta 7013 psc Manuale Utente

TCP/IP Configuration-15

You can add printers manually whenever you cannot find printers automatically 
because of router setup or hop count setting. In general, this should not be necessary.

1. Click on the IP-P2P menu item in Windows. The IP Peer-to-Peer Setup screen 

appears.

2. Press the Printers... button; a new form screen appears.

3. Enter information for the printer in all the fields described below. 

Enter the IP address of  the printer you want to add.

Assign a name to the printer. You can enter any name which you 

feel identifies the printer.

Port Number: The port number of the printer. The default is 10001. 
Description:

Use this field to describe the printer location or the users who will 

access the printer. 

4.  When you have entered all the information, click on the Add button. The printer is 

listed in the Available Printers field at the bottom of the screen.

5.  Click OK when you have finished adding all the printers you want to add. 

1.  Click on the Add Printer button.

2.  Select Local Printer from the menu.

3.  Select the make and model of the printer you want to use. A list of printer ports  

appears. IP peer-to-peer printers will appear in this list.

4.  Select the IP printer you want to use.

5.  Complete the remainder of the printer setup procedure as you would normally.

Note: You may change the printer at a later time by doing the following:

1. Right click on the printer icon and selct properties.

2. Select the Details tab (it may take up to 15 seconds to access).

3. Click on the arrow in the box labeled Print to the Following Port.

4. Select the printer address you wish to use.(In NT, you must unselect the previous 

printer port first.)

5. Click OK.