Konica Minolta 7013 psc Manuale Utente

TCP/IP Configuration-26

Set up a remote printer on the host that sends jobs to a Print Server Card using the 
Print Server Card lpd. To do this: 

1. At the prompt, type: sam 

2. When a window appears, select Printer/Plotter Manager.

3. When the menu appears, select List printer and plotters.

4. When a list appears, select Actions in the title bar.

5. From the pull-down menu, select Add Remote Printer.

6. When a window appears, add values to configure Print Server Card. See the fol-

lowing example.

7. At the bottom of the screen, select Remote Printer is on BSD system from the 

three choices available. 

8. Click on the OK button.

9. Ping the unit to test communications. Type:

ping  <Print Server Card IP address>

10. Ping should confirm your IP address with the message:

<Print Server Card IP address> is alive

11. If the connection is confirmed, you can now print.

When working with the output queue description (WORKOUTQD), there are several 
fields that must be defined for the Print Server Card to function properly as a remote 
printer device. Use the following procedures to do this:

1. When prompted for the remote system, type INTNETADR so the AS/400 recog-

nizes the device as an IP device.

2. Type PORT1.

3. Connection type must be IP.

4. Internet address must be the IP address of the Print Server Card device.

Printer Name 

myprinter

name to be used in lp command

Remote System 
Name

fastprint

Print Server Card hostname as in /etc/
hosts

Remote printer 
Name

PORT1

lpd queue name