Konica Minolta 7013 psc Manuale Utente

TCP/IP Configuration-32

1. Run the Installation script by typing: nicinst. 

The script automatically downloads the correct Print 

Server Card utilities for your particular system and 

prompts you for information as needed.

2. What is the node name of the Print Server unit? 

Type the node name entered in /etc/hosts. For exam-

ple:  printfast and press [Enter].

3. What is the printer name?

 

Type the desired printer name and press [Enter].

4. Your screen will now display the information you provided to the install script. 

For example:

Node name of the Print Server Card: printfast

Printer name to be used: <printer_name>

The printer is attached on: PORT 1

You are asked to OK this configuration. Type yes or no and press [Enter].

5. Is this printer PostScript? 

Type yes or no and press [Enter].

6. The script creates a printcap entry for the printer just configured. The screen dis-

plays the entry and asks if you want the script to append it to your /etc/printcap 

file. See below for a sample printcap file. Type yes or no and press Enter. If you 

type no, you may perform manual edits.

In your /etc/printcap file, be sure not to change the name of the device given Print 

Server Card in Step 2. You must reference the same :lp entry you wrote on the lp 

command line of the printcap file. For example:

<printer_name> | Print Server Card printer:\

:lp=/dev/<printer_name>:\

:if=/usr/nic/infilter:\

:sd=/usr/spool/<printer_name>:

All printcap entries must be prefaced with a tab 

except for the entry on the first line.