Kenwood KIV-700 Manuale Utente
38
|
KIV-700
Clock and Other Functions
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3
Set the Demonstration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Muting Volume upon Reception of
Phone Call
Phone Call
The audio system automatically mutes when a call
comes in.
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
accessory. Refer to
.
Activating Security Code
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select the Standby
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “STANDBY” display.
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “STANDBY” display.
✍
SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
repeatedly also switches source.
2
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
3
Enter Security Code mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”
>
“Security Set”.
When “Enter” is displayed, “– – – –” is also displayed.
4
Enter Security Code
1. Turn the [Volume] knob and press it when
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
5
Confirm the Security Code
Press the [Volume] knob for at least 2 seconds.
When “Re-Enter” is displayed, “– – – –” is also
displayed.
Press the [Volume] knob for at least 2 seconds.
When “Re-Enter” is displayed, “– – – –” is also
displayed.
6
Do the step 4 through 5 operation, and reenter
the Security Code.
“Approved” is displayed.
The Security Code function activates.
the Security Code.
“Approved” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 4 through 5, repeat
from step 4.
7
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Press the [MENU] button for at least 1 second,
and then press it again briefly.