Konica Minolta kn303ev2 Manuale Utente

Konica Network Interface Card INSTRUCTION MANUAL  2-7

At the MAP Setup stage, you need to specify protocols used by the network interface cards and a maximum

IP hop number.  To do this, indicate check-mark next to [Search for IPX based printers] for IPX-based

network interface cards, and [Search for IP based printers] for IP-based network interface cards.

When using an IP protocol, specify [MAX Hops for IP Search], in which case you can select a number

between 0 and 15. The default number is set to 2. If you select 0, only segments pertaining to computers,

which restart the MAP, are found. If you select 2, all networks which are accessible passing through two or

less routers are found.

Note that selecting a large number can result in the occurrence of a large volume of traffics

at one time.

●

To start the MAP, select [Start]-->[Program]-->[Map]-->[MAP].

Once started, MAP searches for the network interface cards existing on the networks according to the MAP

setup. When identifying the network interface card, MAP starts a Web Browser specified as standard, and

displays a list of available network interface cards. By default, the network interface card is named

“KON_(serial number).” When you select a desired network interface card from the list, the [Main Page] of

Web Utilities is displayed.