Kenwood dnx7700bt Manuale Utente
106
106
AV Input Setup
You can set AV input parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
AV-IN SETUP screen appears.
5
Set each item as follows.
AV-IN Interface (DNX570TR)
Select the source connected to AV-IN.
Rear Camera: Select when the rear view
Select the source connected to AV-IN.
Rear Camera: Select when the rear view
camera is connected.
AV-IN (Default): Select when AV device is
connected.
iPod AV Interface Use/ AV-IN2 Interface*
1
Sets the terminal which iPod is connected.
Setting values are iPod and AV-IN2.
iPod (Default): Set this when an iPod is
Setting values are iPod and AV-IN2.
iPod (Default): Set this when an iPod is
connected using KCA-iP202
connector. You can listen to
audio or watch video in your
iPod as iPod source.
connector. You can listen to
audio or watch video in your
iPod as iPod source.
AV-IN2: Set this when an iPod is connected
using KCA-iP102 connector.You can
listen to audio in your iPod as iPod
source. You can also listen to audio or
watch video output from a AV device
as AV-IN2 source.
listen to audio in your iPod as iPod
source. You can also listen to audio or
watch video output from a AV device
as AV-IN2 source.
AV-IN Name/AV-IN2 Name*
2
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is “VIDEO”.*
a system that is connected via the AV INPUT
port. Default is “VIDEO”.*
3
*1 This item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [AV-IN2 Name] becomes settable when
“AV-IN2” is selected in [iPod AV Interface
Use].
Use].
*3 When ”Rear Camera” is selected for [AV-IN
Interface], ”Rear Camera” is selected as the
default of [AV-IN Name].
default of [AV-IN Name].