Kenwood dnx7700bt Manuale Utente
142
Controlling General Audio
1
Touch [Audio Control].
2
Set each item as follows.
Fader # / Balance #
Adjust the volume balance around the
touched area.
[
Adjust the volume balance around the
touched area.
[
C] and [D] adjust the right and left volume
balance.
[
[
R] and [S] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjust the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjust the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See
.
Bass Boost (DNN990HD)
Set the amount of bass boost among “OFF”/
“Level1”/ “Level2”/ “Level3”.
Set the amount of bass boost among “OFF”/
“Level1”/ “Level2”/ “Level3”.
Loudness (DNN770HD)
Turns the loudness control function on or
off. If turned on, high and low tones are
automatically enhanced during low volume.
Settable only when zone function
Turns the loudness control function on or
off. If turned on, high and low tones are
automatically enhanced during low volume.
Settable only when zone function
is
set to off.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.