Kenwood dnx7700bt Manuale Utente

The sound skips when an audio 

file is being played.

The disc is scratched 

or dirty.

Clean the disc. 

See 

.

The recording 

condition is bad.

Record the file again or use another disc.

The Touch Sensor Tone doesn’t 

sound.

The preout jack is being 

used.

The Touch Sensor Tone cannot be output 

from the preout jack.

Protect

Protective circuit has been activated 

because a speaker cord has shorted 

or it has come in contact with the 

car chassis.

Wire or insulate the speaker cord as 

appropriate and then push the <Reset> 

button 

Hot Error

When the internal temperature of 

this unit rises to 60°C or more, the 

protection circuit is activated and 

you may not be able to operate 

the unit.

Use the unit again after reducing the 

temperature of the unit.

Mecha Error

The disc player is malfunctioning.

Eject the disc and try inserting it again. Contact 

the Kenwood dealer if this indicator continues 

blinking or the disc cannot be ejected.

Disc Error

An unplayable disc is inserted.

Change the disc. 

See 

Read Error

The disc is quite dirty.

Clean the disc. 

See 

.

Disc is upside down.

Load the disc with the labeled side up.

Region Code 

Error

The disc you wanted to play has a 

region code that cannot be played 

with this unit.

See 

try another disc.

Parental Level 

Error

The disc you wanted to play has a 

higher level than the parental level 

you set.

Set the parental level. 

See 

.

Error 07–67

The unit is not operating correctly 

due to some reason or other.

Push the unit’s Reset button. If the “Error 

07−67” message does not disappear, see your 

nearest Kenwood dealer.

No Device 

(USB device, 

Bluetooth 

audio player)

The USB device is selected as a 

source although no USB device is 

connected.

Change the source to any source other than 

USB/iPod. Connect a USB device, and change 

the source to USB again.