Fishman adt-100-s Manuale Utente

11..   Thoroughly clean the surface area onto which you have chosen to mount the trigger.

The shell must be dry and free of dust or other contaminants.

22..   Remove the release paper from one of the three adhesive squares provided and affix

to the prepared surface of the shell. Make sure the adhesive square is set firmly in
place.

33..   Clean the bottom of the trigger. Remove the remaining piece of release paper from

the 1" adhesive-bar square and place the trigger, “f” logo side up, in the center of
the square.

44..   With the trigger in place, remove the release paper from the adhesive backed clamp

and attach the clamp to the drum shell or to the drum holder so that the Jack will
point downward when inserted in the clamp.

B

B

A

AS

SS

S

D

D

R

RU

UM

M

Because of possible cross-talk from rack mounted toms, optimum mounting location on
bass drums is on the batter head about 2-3” from the rim. Follow the shell-mounting
procedure, making sure that the surface of the head is clean and dry. DO NOT PLACE
THE TRIGGER NEAR THE BEATER AREA. Because of the magnitude of constant vibra-
tions in this area the trigger life could be considerably shortened.

FF

IIN

NEE

TT

U

UN

NIIN

NG

G

The ADT-100-S tracks extremely well when mounted solidly in the proper location and
if the sensitivity of the interface unit has been properly adjusted. However, double-trig-
gering or Cross-talk from one drum to another can occur.

A high volume live performance situation can cause interaction of the drum heads and
the amplification system. We recommend reducing the input sensitivity on the interface
unit or employing internal head dampers.

Also, if the drums are not isolated or if stands are allowed to bang into them, cross-talk
will occur. Try using some padding material or reinforcing your stands to accomplish
better isolation of each drum.