Funai drv-b2734 Manuale Utente

Pagina di 76
63
VC
R
 fu
nc
tion
s
EN
Playback
1
Press [STANDBY-ON] to turn on the 
unit.
To play back a tape, turn on the TV and be sure to 
select the input to which the unit is connected.
2
Press [VCR
].
3
Insert a prerecorded tape, then press 
[PLAY 
P] to begin playback.
4
During playback, press [PAUSE 
p].
Playback will be paused and sound will be muted.
5
Press [PLAY 
P] to resume playback.
6
Press [STOP 
S] to stop playback.
7
Press [STOP / EJECT 
SO] on the 
unit to eject the tape.
Note
• When a tape without record tab is inserted, the unit 
will start playback automatically.
• Tracking will be automatically adjusted upon 
playback. To adjust the tracking manually, press 
[PROG. 
U / D].
Recording and one-touch timer 
recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing the 
number buttons on the remote control.
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP 
(standard play) or LP (long play) mode by pressing 
[REC SPEED] on the remote control.
• Refer to page 28 for instructions on timer recording.
1
Turn on the unit and insert a 
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR
].
3
Select the recording speed using 
[REC SPEED].
• The desired recording speed is selected in SP 
(standard play) or LP (long play) mode by 
pressing [REC SPEED].
4
Select the desired channel to record 
using [PROG. 
U / D] or 
[the Number buttons].
5
Press [REC / OTR] to start recording.
To temporarily stop recording or to resume it, 
press [PAUSE 
p]. After the unit has been in 
pause mode for 5 minutes, it will stop 
automatically to protect the tape and the video 
head from damage.
6
Press [STOP 
S] when the recording 
is completed.
VCR functions
VCR
VCR
Tape speed
Recording / Playback Time
Type of tape
E60
E120
E180
SP mode
1 hour
2 hours
3 hours
LP mode
2 hours
4 hours
6 hours
VCR
VCR
DRV_B2737_B2734.book  Page 63  Thursday, March 31, 2005  10:04 PM