Cambridge Audio 540d v2 Manuale Utente
C
SL
L
L
SW
SR
R
R
Power AC
On
Off
Power
SCART (Composite/RGB/Stereo Audio)
In
Out
www.cambridge-audio.com
Toslink
Optical
Optical
S/P DIF
Co-axial
Co-axial
azur 540D V2.0 DVD Player
Power Rating
:
100-240V AC ~ 50/60Hz
Max Power Consumption
:
25W
Designed in London, England
Composite
S-Video
Cr/Pr
Cb/Pb
Y
Component
Video Out
5.1 Channel Audio Out
This product complies with DHHS rules 21 CFR, Chapter 1,
Subchapter J, Part 1040 at date of manufacture.
Apparatus claims of US patent nos. 4,631,603; 4,577,216;
4,819,098 and 4,907,093 licensed for limited viewing only.
4,819,098 and 4,907,093 licensed for limited viewing only.
“DTS” is a trademark of Digital Theatre Systems Inc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works
©1992-1997 Dolby Laboratories. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may not cause
harmful interference; 2) This device must accept any interference,
including interference that may cause undesired operation.
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
Stereo
Out
Digital Outputs
HDMI Out
Manufactured in an ISO9002 approved facility.
Control Bus
In
IR Emitter
Caution
Risk of electric shock.
Do not open.
Avis
Risque de choc electrique.
Ne pas ouvrir.
Achtung
Vorm öffnen des gerätes.
Netzstecker ziehen.
8
Audio connections
Do not plug in the mains power lead or turn the unit on until all
connections have been made.
Three types of audio connection can be made between the 540D V2 and
your stereo/AV system:
Analog Stereo
Digital Audio
Analog 5.1
AV receiver
with 5.1
analog inputs
with 5.1
analog inputs
Front right
speaker
speaker
Surround right
speaker
speaker
Front left
speaker
Surround left
speaker
Centre speaker
Subwoofer
1
2
Analog stereo
The analog stereo outputs should be used play back of CDs, DVDs etc in
stereo through a conventional amplifier or AV receiver with analog stereo
inputs.
Analog stereo is also usually the best connection method for listening to
CDs and other stereo discs for best possible sound quality. It is often a
good idea to connect both the analog stereo outputs (for CD playback)
and digital audio outputs (for surround sound decoding) at the same
time.
To connect an analog stereo system to the 540D V2, use stereo phono
cables (stereo 2RCA-2RCA).
Digital audio
The digital audio outputs should be used to decode the surround-sound
soundtracks of DVDs with an external AV Receiver (Note: SPDIF output
must be set to ‘RAW Bitstream’ in the Audio Setup menu). The 540D V2
sends an undecoded audio bitstream to the AV Receiver for decoding
into 5.1/6.1/7.1 etc.
Either a 75ohm co-axial cable designed for digital audio or a TOSlink
fibre optic cable should be used (only one at a time).
Note: It is also possible to output stereo digital audio from the Digital
Outputs for recording on conventional CD-R/MD etc. machines, see
section on DVD Player setup.
Analog 5.1
The 540D V2 is also capable of decoding Dolby Digital 5.1 or Dolby Pro
Logic II soundtracks itself and outputting these as Analog 5.1.
Note: Downmix should be set to ‘Off’ in the Speaker Setup menu for this
to work.
To connect to an AV receiver or amplified speaker system, use 6 x
phono/RCA cables.
3
1
2
3
1
2
3
AV receiver
In
OR
Phono cable
(2RCA-2RCA)
In