Chauvet 250 Manuale Utente
Page 4 of 20
Intimidator™ Spot LED 250 User Manual Rev. 11
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
Notes include important safety information about installation, usage, and maintenance.
·
This product is not intended for permanent installation.
·
Always connect the product to a grounded circuit to avoid the risk of electrocution.
·
Always disconnect the product from power before cleaning or replacing the fuse.
·
Avoid direct eye exposure to the light source while the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the product from power cord by pulling or tugging on the cord.
·
If mounting the product overhead, always secure to a fastening device using a
safety cable.
safety cable.
·
Make sure there are no flammable materials close to the product when operating.
·
Do not touch the product’s housing when operating because it may be very hot.
·
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
product is within the range stated on the decal or rear panel of the product.
·
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
expose the product to rain or moisture.
·
Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
(50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the product’s housing are blocked.
·
Never connect the product to a dimmer.
·
Make sure to replace the fuse with another of the same type and rating.
·
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
hanging/mounting bracket or the handles.
·
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the
product at higher temperatures.
product at higher temperatures.
·
In the event of a serious operating problem, stop using the product immediately.
·
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
damage or malfunction. Contact the nearest authorized technical assistance center.
·
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.
user, be sure that they also receive this document.