Nero neronet Manuale Utente
Quickstart NeroNET
Configuring the recorder
• 25
5.2 Selecting
recorders
The recorder actively employed by NeroNET is selected in the 'Active recorder'
field. All other fields in this sector then refer solely to the selected recorder.
field. All other fields in this sector then refer solely to the selected recorder.
Open the
area. Click on the dropdown button, mark the desired
recorder and click on 'Apply' to save the change.
Only one recorder can be selected at the server, i.e. it will not be possible to
record simultaneously on two or more recorders.
record simultaneously on two or more recorders.
5.3
Setting the recording speed
Usually NeroNET automatically recognizes the recorder's maximum recording
speed. However, should this rate not be correctly recognized, the actual top
speed can be entered manually.
speed. However, should this rate not be correctly recognized, the actual top
speed can be entered manually.
Open the
area. To set the maximum recording speed manually,
enter the number (multiple of the CD speed) that represents the recorder
speed and click on 'Apply' to save the change.
speed and click on 'Apply' to save the change.
5.4
Activating buffer underrun protection
Usually NeroNET automatically recognizes whether a recorder offers protection
from buffer underrun or not. If recognition is impossible or incorrect, this
information can be entered manually.
from buffer underrun or not. If recognition is impossible or incorrect, this
information can be entered manually.
Open the
area. Activate manual input of buffer underrun
protection using the 'buffer underrun protection' checkbox and click on 'Apply'
to save the change.
to save the change.