Brother HL-5050 Manuale Utente

2 - 10 TCP/IP PRINTING

Brother print servers will work with IBM LAN Server, OS/2 Warp 
Server networks that have IBM TCP/IP V2.0 or later installed on the 
file server (TCP/IP is supplied as standard with LAN Server V4.0 and 
later as well as Warp Server). Use the following procedure to 
configure the print server on an LAN Server or OS/2 Warp Server file 
server, or on an OS/2 Warp Connect workstation:

Make sure that TCP/IP software is installed on your OS/2 file server. 
If you have not already done so, open the TCP/IP folder on the 
desktop, and double click on the TCP/IP Configuration icon to add 
the IP address to the OS/2 file server (consult your system manager 
for this address).

Refer to chapter 10 for information on how to assign an IP address 
to the printer.

From the OS/2 desktop open the Templates folder. Use the 
right mouse button to drag the Printer icon (not the Network 
Printer icon) onto the desktop.

The Create a Printer window should be open (if it is not, double 
click on the printer icon).

Type in any name for the printer.

Select the default printer driver. If the desired printer driver is not 
listed, click on the Install new Printer Driver button and add the 
driver.