Brother HL-5040 Manuale Utente

6 - 7 NOVELL NETWARE PRINTING

names are 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of 

the Ethernet address (MAC address)). 

Select the print server that you wish to configure and double 
click it. You will be asked for a password. The default password 
is  

access

.

Select the NetWare tab. 

If it is not already selected, select Queue Server as the 
operating mode. 

Click the Change Bindery Queues button.

Select the NetWare server which you wish to configure.

Select the New Queue button and type in the queue name 
which you wish to create.

Once you have done that highlight the queue name you 
created and click on the Add button.

Click on Close and then OK.

Now exit the BRAdmin application. You are ready to print.

You can find the node name and MAC address by printing 
out the printer configuration page. Refer to the Quick Setup 
Guide for information on how to printer the configuration 
page on your print server.

If necessary change the Print Server Name. The default 
NetWare print server name will usually be 

BRN_xxxxxx_P1

 

where 

xxxxxx

 is the Ethernet address of the print server. Be 

careful! Changing the name may impact the configuration of 
other protocols because the print server service names will 
be altered.