Brother HL-5040 Manuale Utente

NOVELL NETWARE PRINTING 6 - 18

Execute the BRCONFIG from the Windows

®

 menu.

Select the print server from the list of print servers. When you 
get the message that the print server is connected, press the 
ENTER key and type the default password of 

access

 in 

response to the 

#

 prompt (the password will not echo), and then 

press the ENTER key again in response to the 

ENTER 

Username>

 prompt. When you get the 

Local>

 prompt, type:

SET SERVICE service TREE tree
SET SERVICE service CONTEXT Context

■

Where 

tree

 is the NDS tree name.

■

Where 

context

 is the name of context where the print server 

resides.

■

Service is the name of the service assigned by NetWare print 
server name (where the default services are 

BRN_xxxxxx_P1

 for the Brother printer, where 

xxxxxx

 is 

the last six digits of the Ethernet address (MAC address)).

■

You can also enter the TREE and CONTEXT name using 
your web browser, by connecting to the Brother print server 
using the TCP/IP protocol and selecting the NetWare 
protocol configuration.

Use the BRCONFIG command or TELNET command: 

SET 

NETWARE RESCAN 

to force the print server to rescan for file 

servers, or power cycle the printer.

The same service assigned by NetWare print server cannot 
be used for both queue server mode and remote printer 
mode. If you want to enable remote printer capabilities on a 
service other than the default NetWare service, you must 
define new services that are enabled for NetWare and for the 
desired port. Refer to Appendix in this manual for information 
on how to do this.