Brother HL-2400CEN Manuale Utente

USER’S GUIDE

4–50

 

 Pressing the 

 button allows you to select fonts and symbol/character

sets.
 

 ✒  Notes
 When you use the 

 button, note the following:

• 

The 

 button is effective in the HP PCL5C, EPSON FX-850, and

IBM Proprinter XL modes. However the settings are subject to the
current emulation mode. Note that the 

 button does not work in

the BR-Script 2 mode.

• 

If the application software supports font and symbol/character set
selection, you do not need to set them with the 

 button. The

software or command setting overrides the button setting.

• 

If you want to use optional fonts instead of the printer’s resident fonts,
be sure to install a font cartridge/card that has your preferred fonts.
The printer automatically selects the font that has exactly the same or
similar characteristics as those you set through the software or with a
command. If the installed font cartridge/card happens to have a font of
similar characteristics, the printer will print with an unexpected font.

• 

You can store the fonts you require on a flash memory card or HDD
card only in the HP PCL5C mode or BR-Script 2 mode when a card is
installed. See 

 
 

 
 When the HP PCL5C emulation mode has been selected, the font and
symbol set can be set separately as the primary or secondary font.
 
 When the primary font is selected;
 

 Message   To do:
 

SELECT FONT P 

 Set the primary font

 SYMBOL SET  P 

 Set the symbol set

 TABLE PRINT P 

 Print the code table

 

 When the secondary font is selected;
 

 Message  To do:
 

SELECT FONT S 

 Set the secondary font

 SYMBOL SET  S 

 Set the symbol set

 TABLE PRINT S 

 Print the code table