Nero nero wave editor 2 Manuale Utente
Nero Wave Editor
Recording gramophone records
• 29
6.2 Recording
1. Start Nero Wave Editor: Start > programs > Ahead Nero > Nero Wave
Editor.
2. In the 'File' menu, select the 'New' command.
3. In the 'Audio' menu, select the 'Record' command and determine the desired
sampling rate and sampling resolution. To so this, click on the dropdown
button and highlight the desired list box.
button and highlight the desired list box.
For a recording that is to be written on a CD, a sampling rate of 44100 Hz and a
sampling resolution of 16 bit are recommended.
sampling resolution of 16 bit are recommended.
4. Click on the 'OK' button to take over these settings. The recording console
will appear.
5. Click on the
button to start recording, then place the stylus on the record.
You will see the recording time and the level control display in the recording
console while you are recording.
console while you are recording.
If the level is too loud or too quiet, you can change it. Open the volume control
and move the slider of the 'line' section in the desired direction.
and move the slider of the 'line' section in the desired direction.
6. At the end of a track, click on the 'OK' button to stop recording. The audio file
recorded will appear in the display area.