Cadillac seville 2002 Manuale Utente

A second mirror, seating and steering wheel position 
can be programmed by repeating the above steps and
pressing button 2 (for driver 2). Each time a memory
button is pressed, a single beep will sound. Each time
button 1 or 2 is pressed and released while the vehicle is
in PARK (P), the memory positions will be recalled. If
the vehicle is not in PARK (P), the memory buttons
must be pressed and held to recall the stored positions.

If you use the remote keyless entry transmitter to enter
your vehicle, automatic seat and mirror movement will
occur. The numbers on the back of the transmitters, 
1 and 2, correspond to the numbers on the buttons on 
the door panel.

When the key is placed in the ignition in OFF if you
have entered the vehicle without using the remote
keyless entry transmitter, the seats and mirrors will
automatically adjust to the programmed position of 
the last driver.

To stop recall movement of the memory feature at 
any time, press one of the power seat controls or
memory buttons.

Two personalized exit positions can be set by first
recalling the driving position (by pressing 1 or 2), then
positioning the steering wheel and seat in the desired
exit positions and then pressing and releasing the
MEMORY SET button and, within five seconds,
pressing the EXIT button. With the vehicle in
PARK (P), the exit position for the previously set 
driver can be recalled by pressing the EXIT button. 
The mirrors, power lumbar and shoulder belt height
positions will not be stored or recalled for the 
exit positions.

Further programming for automatic seat and mirror
movement can be done using the Driver Information
Center (DIC). You can select or not select the following:
D Automatic seat and mirror movement when the

vehicle is unlocked with the remote keyless entry
transmitter, or

D automatic seat and mirror movement when a key is

placed in the ignition.

For programming information, see “Vehicle
Programming and Personalization Features” in 
the Index.