Hercules djconsole Manuale Utente

 

 

 

User Manual – 5/14 

The DJ Console can be used in conjunction with an internal sound card (dedicated to network 
gaming, for example) without causing conflicts on your computer.  When you connect the DJ 
Console it is automatically recognized as the main sound card, and once it is disconnected the 
internal sound card resumes its original functions. 
Consequently, you can connect and disconnect your DJ Console at any time, even when the 
computer is switched on, thanks to its USB connection. 
 

Your DJ Console has a cover, allowing you to transport it without any danger of damaging the top 
face.  This cover can also be attached to the underside of the DJ Console as an inclined base, 
allowing you to use your DJ Console under optimal conditions.  By default, the cover is configured 
as an inclined base. 

- Turn over the DJ Console and place it on a flat surface. 
- Holding the DJ Console with one hand, take hold of the cover 

by the OPEN opening. 

- Pull the cover up towards you, pulling up on one side and 

then the other in order to detach the cover. 

- Position the tabs on the lower part of the cover in the 

corresponding slots on the DJ Console. 

- Apply pressure on both sides of the cover where the word 

CLOSE appears until it snaps into place. 

 

 

Your DJ Console also features a shoulder strap for easy transportation.  To install the shoulder 
strap: 

- Thread the Velcro flaps through the two buckles on the 

DJ Console. 

- Attach the flaps to the Velcro band.