Garmin g1000 mooney primaryflightdisplay pilots guide m20m m20r Manuale Utente
190-00443-00 Rev. A
Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-28
SUPPLEMENTAL FLIGHT DATA
INSET MAP
The Inset Map is a smaller version of the Navigation
Map Page on the MFD. It appears in the lower left corner
of the PFD and is displayed by pressing the INSET soft-
key. The map disappears from the PFD anytime pitch is
greater than +30° and less than –20°, or when a 65° bank
angle is reached. The direct-to function is not available
from the Inset Map. The fuel reserve rings are enabled
and disabled from the MFD only. The Inset Map displays
the following information:
of the PFD and is displayed by pressing the INSET soft-
key. The map disappears from the PFD anytime pitch is
greater than +30° and less than –20°, or when a 65° bank
angle is reached. The direct-to function is not available
from the Inset Map. The fuel reserve rings are enabled
and disabled from the MFD only. The Inset Map displays
the following information:
NOTE: The map orientation is always the same as
that for the Navigation Map Page on the MFD.
• Moving map with orientation references
– North Up
– Track Up
– DTK Up
– HDG Up
• Zoom range legend
• Declutter levels (3)
• Aircraft icon
• Traffic data
• Topo data
• Terrain data
• Lightning data (optional)
• Enabled map features
• Active navigation route
• Track vector
• Fuel ring (reserve)
– North Up
– Track Up
– DTK Up
– HDG Up
• Zoom range legend
• Declutter levels (3)
• Aircraft icon
• Traffic data
• Topo data
• Terrain data
• Lightning data (optional)
• Enabled map features
• Active navigation route
• Track vector
• Fuel ring (reserve)
NOTE: Map orientation and other map features
are enabled on the MFD (refer to the Multi Func-
tion Display Pilot’s Guide).
NOTE: Refer to the Multi Function Display Pilot’s
Guide for a detailed explanation of the declutter
levels.
The following Inset Map operations can be performed
and are independent of the MFD:
• Change the zoom range
• Change the declutter level
• Enable/disable traffic data
• Enable/disable topo data
• Enable/disable terrain data
• Enable/disable lightning data (optional)
• Pan Map
• Change the declutter level
• Enable/disable traffic data
• Enable/disable topo data
• Enable/disable terrain data
• Enable/disable lightning data (optional)
• Pan Map
Figure 3.6.4 Inset Map
1
9
8
2
3
4
5
7
6
NAV Compass Range
3
4
4
9
7
2
5
6
6
8
1
Wind Vector
Map Range
NAV Compass
Traffic Icon and Scale
Traffic Icon and Scale
Terrain Icon
Active Navigation Route
Track Vector
Track Vector
Map Orientation