Grizzly h8088 Manuale Utente

Model H8088

2-Stage

Transmission Jack

This jack is designed to assist in transmis-

sion removal only. Failure to follow these

instructions when using the transmission

jack could result in serious personal injury

or death:

1. ALWAYS support the vehicle with appro-

priately rated support stands before

using this jack.

2. Only use this jack on hard level sur-

faces such as concrete or asphalt.

3. DO NOT overload this jack beyond the

maximum lifting capacity. Overloading

can cause the jack to collapse.

4. DO NOT use this jack to lift or support a

vehicle.

5. Keep fingers and hands away from

pinch points when lowering.

6. Only transport load with jack platform

in the lowered position.

7. Center the load on the jack for stability

and use safety chain to secure load.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TR8855 PRINTED IN CHINA

Specifications

Maximum Lifting Capacity .................. 1,100 Lbs.
Lifting Range ........................................34"–71

⁄

Weight ................................................... 138 Lbs.

Assembly

Refer to the parts breakdown on the back of this
page to understand how the jack is assembled.

Operation

Pump Control Handle (Figure 1): Point to the
left to allow the jack platform to lift when pumped.
Point to the right to lower the jack. (If the jack
holds a heavy load, turn very slowly to control the
lowering rate and avoid dropping the load.)

Foot Pedal Pump (Figure 1): When moved up
and down, the foot pedal pump lifts the jack plat-
form.

Figure 1. Pump controls.

Pump

Control

Handle

If you need help with the Model H8088, call our
Technical Support line at: (570) 546-9663.

Figure 2.

Platform adjustment knobs.

Platform Adjustment Knobs (Figure 2): Located
under the jack platform, these knobs allow for pre-
cision placement and leveling of the platform.

Pump

Foot

Pedal

Platform

Adjustment Knobs