Garmin stylus nx300 Manuale Utente

Connecting a Phone or Answering Machine

2. To use a telephone or answering machine, you need a second phone cable. 

Connect one end of the cable to the telephone or answering machine, and 
connect the other end to the 

EXT.

 port on the back of the NX300/305 Series.

Note:
Remove the cap from the EXT. port, if you haven’t already done so, before 
connecting a phone or answering machine.

If your answering machine is set to pick up on the fourth ring, you should set the 
NX300/305 Series to pick up on the fifth ring or later:

1. Press the 

Copy/Fax

 button to select Fax mode, then press 

Menu

.

2. Press u or d to select 

Fax Setting

, then press 

OK

.

3. Press u or d to select 

Communication

, then press 

OK

.

4. Press u or d to select 

Rings to Answer

, then press 

OK

.

5. Press u or d or use the numeric keypad to select the number of rings, then 

press 

OK

. Select more than the number of rings needed for the answering 

machine to pick up.

In Auto Answer mode, if the incoming call is a fax and you pick up the phone or 
the answering machine answers, the NX300/305 Series automatically begins 
receiving the transmission. If the other party is a caller, the phone can be used as 
normal or a message can be left on the answering machine.

Note:
A phone or answering machine must be connected to the EXT. port for the NX300/305 
Series to detect an incoming fax call when a phone is picked up. If a fax call comes in, 
and you pick up the phone without having a phone or answering machine connected to 
the EXT. port, the call will be disconnected when you hang up and the NX300/305 
Series will not receive the fax.

Telephone wall jack