Grizzly h6165 Manuale Utente

Model H6165

Cargo Carrier

Hex Nuts

Figure

. Model H6165 Cargo Carrier

Assembly

1. Arrange the three holes in the receiver mount

vertically.

2. Insert the receiver mount under the mesh

screen of the bed frame and between the
arched bed frame supports as shown in

Figure 1.

3. Insert two hex bolts through the top of the

bed frame and down through the receiver
mounting bar. Insert another in the top hole.

4. Attach a hex nut to each of the hex bolts and

tighten.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#CA6647

PRINTED IN CHINA

Model H6165 Assembly Inventory

Receiver Mount ................................................. 1
Bed Frame ......................................................... 2
Hex Bolts M10-1.5 x 45 .................................... 2
Hex Nuts M10-1.5 ............................................. 2

Like all Grizzly products, the Model H6165 Cargo
Carrier is covered by a one year warranty. Should
any problems arise, please call our customer
service center at (570) 546-9663 or e-mail us at
techsupport@grizzly.com.

Receiver

Mount

Bed

Frame

1. Never exceed the 500lbs capacity of the cargo carrier, or the maximum tounge weight of your

hitch.

2. Always remove the cargo carrier when not in use.

3. Use extra caution when backing up, remember the extra length of your vehicle while cargo

carrier is in use.

4. Avoid blocking the rear view visibility with items on the cargo carrier.

5. Load the cargo carrier evenly.