Garmin GPSMAP 60Cx Manuale Utente

G

ETTING

 S

TARTED

 > 

The GPSMAP 60Cx is equipped with a pre-installed 

MicroSD card. 
To install or remove the MicroSD card:

1.  Remove the Battery Compartment Cover 

from the back of the unit and remove the two 

batteries.

2.  Locate the card tray at the center of the 

battery tray and check to be certain the card is 

installed in the tray.

3.  If you desire to remove the card, slide the tray 

cover up, then lift it toward you to remove the 

card from the tray. 

4.  To re-insert the card, lay the card in the tray, 

close the tray, and replace the batteries and 

cover when finished.

1.  Lift the weather cover from the USB port on 

the upper back of the unit. It recommended 

that you use the USB port rather than the 

Serial Connection port for faster data transfer.

2.  Connect the USB cable provided with the unit 

to the USB port on your PC and to the mini-

USB port on the back of the unit.

3.  Follow instructions for selecting and 

downloading maps provided with the 

MapSource map data disk.

USB Port  

under weather 

cover

Back of GPSMAP 60Cx 

with Battery Cover 

removed

Detail of MicroSD card tray in 

Battery Compartment

MicroSD card tray 

is located beneath 

the batteries in the 

battery compartment.

Slide the tray cover back to 

OPEN, then lift to remove 

or insert the MicroSD card.  

Close and slide forward to 

LOCK.

Unlock

Lock