Garmin etrex legend cx Manuale Utente

B

ASIC

 O

PERATION

 > 

U

SING

 T

RACKS

3.  Press 

Enter to start the area calculation. 

As you begin to move and define the area’s 

boundaries, a Stop button appears at the 

bottom of the page.

4.  When finished defining the area, press 

Enter 

to open the page with a Save button.

5.  Press 

Enter to save the new track to the 

Saved Tracks list on the Tracks Page.

You can save your track log to use later as a 

TracBack. When initiated, a TracBack route takes you 

back to the oldest stored track log point.

1.  With the Saved Tracks Page for the track or 

the Track Log open, highlight the 

TracBack 

button, and press 

Enter to open the TracBack 

Page showing the track. You can select the 

point you want to TracBack to. 

2.  Use the 

Rocker to move the pointer to the 

point on the map, and press 

Enter to start 

navigating the TracBack.

3.  Select either 

Follow Road to route back to 

the selected point using available roadways, 

or select 

Follow Track to retrace your original 

path of travel. Highlight the 

Don’t Ask Again 

option, and press 

Enter if you want to use the 

same option each time you use TracBack.

  The Map Page opens with directions to the 

first turn on the track at the top of the page.

4.  Move in the direction of the first turn. When 

you reach the first turn, directions to each turn 

is shown, until you reach your destination. 

5.  To exit, press 

Menu, and select Stop Navigation.

Start calculation

Save calculated track