Garmin etrex venture cx, legend cx Manuale Utente

A

PPENDIX

 > 

C

ONNECTING

 Y

OUR

  L

EGEND

 C

X

 

TO

 

A

 C

OMPUTER

You can connect your eTrex to your computer using 

the PC/USB connector cable. This cable is provided 

as an accessory with the eTrex Legend Cx and is 

available for use with the eTrex Venture Cx through 

purchase from you Garmin Dealer or the Garmin 

Web site at: www.garmin.com.  A PC/USB cable 

is required for loading detailed mapping data from 

MapSource data disks and for software updates. 

1.  Lift the USB protective cover from the back of 

the eTrex, and insert the smaller connector on 

the USB cable into the matching port.

2.  Connect the remaining cable end to your 

computer’s USB port.

The USB drivers are automatically installed when you 

installed the MapSource Trip and Waypoint Manager 

software that is provided with the eTrex Legend Cx.  

Garmin USB drivers can also be downloaded from the 

Garmin Web site at:  

www.garmin.com/support/download_details.jsp?id=591.
When you initially connect the eTrex to a USB 

port, your computer might prompt you to locate 

the destination of the drivers for the device. 

Therefore, be certain to install the USB drivers 

prior to connecting your eTrex to a PC. You only 

need to install the drivers once. After the drivers are 

installed, your computer always detects your eTrex 

when it is connected. USB drivers might be updated 

periodically. You can find updates at the url above.