Garmin VHF 725 Manuale

21

Receiving and Transmitting

      Whenever the VHF 725e is powered-up
(On) it is in the receiving mode. If the unit is
monitoring a channel that is broadcasting, you
will hear that transmission. It is possible to
monitor any channel on any band, but transmis-
sion on some channels is not allowed. Many are
receive only channels, while others are simply
not intended for your category of radio use.

To receive on the VHF 725e:

1. Press and release the PWR key to turn the unit on.

2. Observe that the display screen will come on and

the last channel accessed will be displayed. If there

is someone transmitting on that channel, you will

hear their communication and the RX symbol will

appear on the LCD display. You may now select

from the many receiving options.

3. Press the U/I/C key to select a channel band.

4. Press the UP/DOWN arrow keys to select a

channel. (Figure 10)

5. Press the MEM key when scrolling through the

channels to enter up to ten channels in the SCAN

memory. You must select at least two for the

SCAN feature to activate. (Figure 10)