Garmin gpsmap 535 Manuale Utente

Configuring the Chartplotter

You can configure your chartplotter to sound an alarm when the total 

amount of remaining onboard fuel reaches the specified level.
To receive fuel-level information, your unit must be connected to an 

external fuel sensor, such as the Garmin GFS 10.

1.  From the Home screen, select 

 > 

 > 

 > 

 > 

 (or 

).

2.  If you select 

On, use the 

 to indicate the fuel level at 

which the alarm should sound.

To configure settings for your boat, from the Home screen, select 

 >

.

Keel offset—offset the surface reading for the depth of a keel, 

making it possible to measure depth from the bottom of the keel 

instead of from the transducer location. Enter a positive number to 

offset for a keel. Enter a negative number to compensate for a large 

vessel that may draw several feet of water.

1.  From the Home screen, select 

 > 

 > 

.

2.  Use the 

 to enter the measured distance from the 

transducer location to the water line or to the keel of the boat.

If you are measuring down to the keel (transducer installed at 

the water line), enter a (+) positive number. This shows the 

depth at the bottom of the keel.
If you are measuring up to the water line (transducer installed 

on the bottom of the keel), enter a (-) negative number. This 

shows the depth at the surface.

3.  Select 

 to accept the number.

Temp offset—set the temperature offset for the temperature sensor 

of your transducer.

•

•