Garmin 2595 Manuale Utente

60 

nüvi 2405/2505 Series Owner’s Manual

NOTE: The required fuse for your cable 

is listed after "output" on the back of the 

vehicle power adapter.

Place the silver tip in the end piece. 

Screw the end piece back into the vehicle 

power cable.

The permanent mounting adhesive is extremely 

difficult to remove after it is installed. 
Use the enclosed mounting disk to mount your 

device to the dashboard and comply with certain 

state regulations. 

Clean and dry the dashboard where you are 

placing the disk.

Remove the backing from the adhesive on 

the bottom of the disk.

Place the disk on the dashboard.

Remove the clear plastic cover from the top 

of the disk.

Place the suction cup mount on top of the 

disk. 

Flip the lever down (toward the disk).

Press up on the tab on the top of the cradle.

Tilt the device forward.

Turn the cradle to the right or left.

Apply pressure until the socket on the cradle 

releases the ball on the mount.