Garmin gpsmap 520s Manuale Utente

Configuring the Chartplotter

NMEa 2000 devices—lists the NMEA 2000 devices on your 

network. If a NMEA 2000 device has configuration options or 

settings, select the device for a list of options.

  NOTE: Only the following units are NMEA 2000 compatible:

GPSMAP 451/451s  

GPSMAP 526/526s 

GPSMAP 551/551s 

GPSMAP 556/556s

CaNet devices—lists the CANet devices on your network. If a 

CANet device has configuration options or settings, select the device 

for a list of options.

  NOTE: Only the GPSMAP 420/450/520/550/525/555 (including “s” 

models) are CANet compatible:

You can set the unit to sound an audible alarm when certain 

conditions are met. By default, all alarms are turned off.

1.  From the Home screen, select 

 > 

.

2.  Select an alarm category.
3.  Select an alarm.
4.  Select 

 to turn on the alarm.

5.  Specify alarm information.

  To set a navigation alarm from the Home screen, select 

 > 

 > 

.

arrival—set an alarm to sound when you are within a specified 

distance or time from a turn or destination waypoint.

Type—select whether you want arrival alarms to sound only 

when nearing destinations or when nearing either turns or 

destinations. Select 

 to disable arrival alarms. 

activation—select whether the arrival alarm triggers on time to 

arrival or distance to arrival.
Change Time/Change distance—if you have Activation set to 

Time, select 

 to set the number of minutes before 

arrival that the alarm should sound. If you have Activation set 

to Distance, select 

 to set the distance before 

arrival that the alarm should sound. Use the 

 to change 

the time or distance.

anchor drag—set an alarm to sound when you exceed a specified 

drift distance.
Off Course—set an alarm to sound when you are off course by a 

specified distance.