Garmin gmr 406 Manuale Utente

b

AsIc

 o

PerAtIon

 > 

M

AP

 P

Age

 r

AdAr

 o

verlAy

 Press the

MARPA List soft key.

The Enter Standby (Begin transmitting) option allows you to 

select whether the radar is in Standby Mode or is transmitting. 

Select Enter Standby to place the radar into Standby Mode. While 

in Standby Mode, the radar does not transmit, but power remains 

applied to the Magnetron. Select Begin transmitting to remove the 

radar from Standby mode. After the radar completes “Spinning Up”, 

the radar begins transmitting.

  NOtE: When the radar is placed into standby mode, the GMR 

404/406 will reduce its spinning speed for approximately 15 

seconds, then stop perpendicular to the length of the boat, or as 

defined by the Front of Boat Offset.

The Set Motor to High Speed (Set Motor to Normal Speed) option 

allows you to select the motor speed of the GMR 404/406. Selecting 

Set Motor to High Speed to increases the speed at which the radar 

rotates, thus increasing the speed at which the screen updates.

Radar information can be shown as an overlay on the Map Page. 

When you overlay radar information on the Map Page, press  

ADJ/MENu to access radar options. 

  NOtE: Changing the map scale does not change the radar range. 

When you zoom in or our on the Map Page, the radar overlay is 

scaled to fit.

 On the Map Page, press the

Show Radar soft key.