Brother HL-2600CN Manuale Utente
CHAPTER 5 MAINTENANCE
5-28
Drum Cleaner
!
Caution
Both ends of the Drum Cleaner roller consist of metal bearings that connect
the bias element to the power supply. These must be connected correctly
when you install the Drum Cleaner. Be sure to check how to connect these
correctly by referring to the old Drum Cleaner before you begin replacement.
the bias element to the power supply. These must be connected correctly
when you install the Drum Cleaner. Be sure to check how to connect these
correctly by referring to the old Drum Cleaner before you begin replacement.
Replacing the Drum Cleaner
1.
Press the Power button to turn the printer Off.
2.
Open the Top Cover.
3.
Remove the Drum Cleaner Cover.
Fig. 5-24
4.
Remove the Drum Cleaner by
holding the left and right hand
sides and lift it upwards.
holding the left and right hand
sides and lift it upwards.
Fig. 5-25