Zoom 0335-A 27337 Manuale Utente

Chapter 3: Specifying TCP/IP Settings

15

Macintosh, Linux, and Windows computers.
There are several situations in which you must change your

computer’s TCP/IP settings:

•

 

ALL USERS: If you want to log into the Zoom
Configuration Manager, you must first change your

computer’s TCP/IP settings to work with the modem’s

internal IP address. This is required because your ADSL Bridge

modem uses 1483 Bridged encapsulation as its protocol. See

the table in step 1 of To access the Web interface of your

ADSL Bridge modem on page 27 for the values you need to

specify.

•

 

WINDOWS USERS: If you are using a Windows computer,

you only have to specify TCP/IP settings if you have a static

IP address (or when logging into the Zoom Configuration

Manager, as explained above.) If you are using dynamic IP

addressing, the default TCP/IP settings on your Windows

computer are sufficient. However, if you are troubleshooting

your modem connection, you may want to verify these settings.
The appropriate settings are described in Windows TCP/IP

•

 

MACINTOSH AND LINUX USERS: If you are using a

Macintosh or Linux computer, you must specify TCP/IP

settings regardless of whether your Internet service provider is

using dynamic or static IP addressing. (You must also specify

them if you are logging into the Zoom Configuration
Manager, as explained above.) The appropriate settings are

described in Macintosh TCP/IP Settings on page 16 and