INSTEON 2476d Manuale Utente

 

You can change the color of SwitchLinc Dimmer’s LEDs and also its paddle and trim frame to match the 
décor of any room. 

SwitchLinc Dimmer comes standard with a white paddle assembly, but with an ivory paddle assembly 
included.  You can optionally purchase almond (#2400AL), black (#2400BK), brown (#2400BR), or gray 
(#2400GY) SwitchLinc Color Change Kits from 

. 

Light-pipe color change kits for the LEDs are also available from 

.  Each SwitchLinc 

Indicator Color Change Kit (#2400L) contains five each of blue, red, green, amber, and clear light-pipes.  

You can remove the front paddle and trim frame assembly before or after SwitchLinc Dimmer is installed.  
During the changeover process, the power and the load may remain on and operating.  There are no 
dangerous voltages or unsafe areas under the paddle. 

1.  If SwitchLinc Dimmer is already installed in the wall, remove the 

faceplate from the switch junction box. 

 

Paddle Assembly and 

SwitchLinc body separated 

2.  Remove the four Phillips screws that hold the paddle assembly to the 

metal frame. 

3.  Pull the entire paddle frame straight away from the switch.  You may 

have to wiggle the bottom of the frame to get it free of the bottom SET 
Button.  

 

 

 

 

4.  Using a flat blade, remove the large light pipe as shown.  The light pipe 

will snap out of the frame.  Do the same for the small light pipe. 

 

 

 

 

 

 

 

Snap out the light pipes with a 

flat tool 

Page 27 of 35