Nautilus ne 3000 Manuale Utente
7
OPERATION
> Moving your machine
To move your machine, carefully lift the back end of the unit
and steer using the stabilizer tube. Be gentle while moving the
unit as any sharp impact directly or indirectly to the computer
can affect computer operation.(Fig.7)
and steer using the stabilizer tube. Be gentle while moving the
unit as any sharp impact directly or indirectly to the computer
can affect computer operation.(Fig.7)
IMPORTANT:
Be careful when moving your machine as it is
heavy and awkward. If you do not feel comfortable moving the
unit by yourself, get help. The transport wheels are designed for
indoor use only and should not be used to
unit by yourself, get help. The transport wheels are designed for
indoor use only and should not be used to
--move the unit over rough surfaces such as concrete or asphalt.
> Leveling your elliptical trainer
Your machne can be leveled to compensate for uneven surfaces.
To level the machine, raise or lower the two leveling bolts
located on the underside of the rear stabilizer by screwing them
in or out as needed. (Fig.7)
To level the machine, raise or lower the two leveling bolts
located on the underside of the rear stabilizer by screwing them
in or out as needed. (Fig.7)
> Maintenance
Your Nautilus elliptical requires very little routine maintenance.
To ensure your machine’s performance for many years to come it
To ensure your machine’s performance for many years to come it
is important to keep your machine clean of dirt and sweat. Use a
damp cloth to wipe your machine and computer free of sweat.
IMPORTANT:
To avoid damaging the finish on your machine and computer, never use a
petroleum-based solvent when cleaning. Avoid getting excessive moisture on the computer.
Never store your machine outside or in a uncovered area.
Never store your machine outside or in a uncovered area.
ADDITIONAL INFORMATION
> fig.7
> fig.8