Jenn-Air JMW3430 Manuale Utente

1. From the Setup Menu, touch the button beside Clock.
2. Enter the time using the on-screen number keyboard. A valid 

time must be entered in order to save the settings.

3. If Clear is pressed, the clock clears to 00:00.
4. Choose AM, PM, or 24-Hour.
5. Touch ON/OFF to toggle between Auto Daylight Savings 

Time. When “On,” the clock will automatically be adjusted 
when daylight saving time occurs.

6. Choose ANALOG or DIGITAL for clock style.
7. Touch SAVE. This will return you to the Clock Screen.

1. From the Setup Menu, touch the button at right-hand side of 

screen beside Date.

2. Enter the day using the on-screen number keyboard.
3. Choose the month using the “<“ or “>” buttons.
4. Choose the year using the “<“ or “>” buttons.
5. Touch SAVE. This will return you to the Clock Screen.

1. From the Setup Menu, touch the button at right-hand side of 

screen beside Sound Volume.

2. Adjust the timer, button press, or alert sounds; use the slider 

bar to enter desired sound levels.

3. Touch ON/OFF to toggle between settings for start-up and 

shutdown sounds. When “On,” the oven will make a sound 
when it transitions in and out of idle mode. When “Off,” no 
sounds will be made.

4. If the Cancel button is touched, the sounds settings will go to 

the recommended level.

5. Touch SAVE. This will return you to the Clock Screen.

1. From the Setup Menu, touch the button at right-hand side of 

screen beside Screen Theme.

2. Use the sliding bar to select a screen theme to match your 

oven. 

3. Toggle between Orange and Blue to define your accent color. 
4. Touch SAVE. This will return you to the Clock screen. The 

following message will show: “You have selected a new 
theme. The oven will reset momentarily. Please wait.” It will 
take 1 minute to restart the oven with the new settings.

1. From the Setup Menu, touch the button beside Screen 

Brightness.

2. Use the slider bar to adjust the screen brightness.
3. Choose “Dim The Screen” or “Turn-Off The Screen” for use 

when the oven has been idle for 5 minutes.

4. If the Cancel button is touched, the screen brightness will go 

to the recommended level and return you to the clock display 
screen.

5. Touch SAVE. This will return you to the Clock Screen.

1. From the Setup Menu, touch the button at the right-hand side 

of screen beside Language.

2. From the Language Menu, select your language: English or 

Français.

3. If Cancel button is touched, the language will go back to the 

default setting.

4. Touch SAVE. This will return you to the Clock Screen.

1. From the Setup Menu, touch the button at the right-hand side 

of screen beside Temperature Units.

2. Select a temperature unit: Fahrenheit or Celsius. Toggle 

between °F/°C.

3. You will remain in the Setup Menu.

IMPORTANT: If the buttons on the screen are difficult to touch 
accurately, you may need to calibrate the touchscreen. This 
process is recommended when the oven is installed under a 
counter.
1. From the Setup Menu, touch the button at the right-hand side 

of screen beside Touchscreen Calibration.

2. You will be asked to touch and hold 3 targets to calibrate.
3. Touch NEXT.
4. Touch and hold the center of the targets for 2 seconds on the 

screen.

5. Test calibration by moving the circle around the screen. 

Ensure you can reach all the corners.

6. Touch TRY AGAIN to run calibration again.
7. If Cancel is touched, the Touchscreen Calibration will be 

canceled.

8. Touch SAVE. This will return you to the Setup Menu.

1. From the Setup Menu, touch the button at the right-hand side 

of screen beside Reset All Settings to Factory Default.

2. Touch RESET or CANCEL.
3. If Reset is touched, the following sets will be lost: most used 

modes/foods, My Creations, Date/Time, and Language. The 
Welcome Guide will appear in order to help you reset these 
settings.