Konica Minolta di1610f um gdi 1.1.1 Manuale Utente
5
Troubleshooting
5-2
Di1610f GDI Printer Controller
5.2
Main Error Messages
The table below describes the main error messages that may appear
during PC print mode operations.
during PC print mode operations.
Error Message
Cause
Action
PAPER SIZE ERROR
The paper size specified with
the printer driver differs from
the size of paper that is
loaded.
the printer driver differs from
the size of paper that is
loaded.
Load paper of the correct
size into the tray.
size into the tray.
NO SUITABLE PAPER
“Auto” is selected for Paper
Source with the printer driver
properties, but none of the
copier’s trays contain paper
of the size specified for
printing.
Source with the printer driver
properties, but none of the
copier’s trays contain paper
of the size specified for
printing.
Tray1:
Change the paper size in the
Utility mode, and load the
correct paper into the tray.
Tray2:
Use a paper cassette loaded
with paper of the
corresponding size.
Bypass Tray:
Change the paper that is
loaded.
Change the paper size in the
Utility mode, and load the
correct paper into the tray.
Tray2:
Use a paper cassette loaded
with paper of the
corresponding size.
Bypass Tray:
Change the paper that is
loaded.
INCORRECT PAPER SIZE
Paper size specified by the
printer driver is not loaded in
the specified paper tray.
printer driver is not loaded in
the specified paper tray.
PAPER EMPTY
There is no paper in the
specified tray or the specified
tray is not loaded in the
copier.
specified tray or the specified
tray is not loaded in the
copier.
Load paper into the tray or
load Tray2 into the paper
feed cassette.
load Tray2 into the paper
feed cassette.
MEDIA TYPE ERROR
Media type specified by the
printer driver is not loaded in
the specified paper tray.
printer driver is not loaded in
the specified paper tray.
Change the media type in
the Utility mode, and load the
correct paper into the tray.
the Utility mode, and load the
correct paper into the tray.
MEMORY FULL
The memory is full of stored
data.
data.
Press any key, and then turn
the machine off, then on
again.
the machine off, then on
again.