Kenwood KDC-X895 Manuale Utente
English
|
19
Function of remote control
Direct access tuning
Entering the frequency and tuning.
1
Enter Direct access tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Press the number buttons on the remote
control.
Example:
Desired frequency
Press button
92.1 MHz (FM)
[9], [2], [1]
810 kHz (AM)
[8], [1], [0]
3
Search the frequency
Press the [
Press the [
4] or [¢] button on the remote
control.
Cancelling Direct access tuning
Press the [ ] button on the remote control.
Tuner setting
Sets the tuner items.
1
Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
Press the [SRC] button.
Select the “TUNER” display.
2
Enter Function setting mode
Press the Control knob for at least 1 second.
Press the Control knob for at least 1 second.
3
Select the Setting mode
Turn the Control knob to select “Settings”, and
then press the Control knob.
Turn the Control knob to select “Settings”, and
then press the Control knob.
4
Select the desired Tuner setting item
Turn the Control knob to select Tuner setting
item, and then press the Control knob.
Turn the Control knob to select Tuner setting
item, and then press the Control knob.
Display
Overview
“Settings”
“MONO”
You can reduce the noise when stereo
broadcasts are received as monaural.
“ON” / “OFF”
“TI”
Switches to the traffic information
automatically when the traffic bulletin starts
“ON” / “OFF”
( : Factory setting)
5
Set the Tuner setting item
Turn the Control knob to select desired value,
and then press the Control knob.
The previous item is displayed.
Turn the Control knob to select desired value,
and then press the Control knob.
The previous item is displayed.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Press the [ ] button for at least 1 second.