Kenwood KDC-X895 Manuale Utente
English
|
41
Making a voice dialing call
1
Enter Bluetooth mode
KDC-X895
KDC-BT848U
Press the [ ] button.
KDC-X595
KDC-448U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
“BT MODE” is displayed.
2
Enter voice recognize mode
Turn the Control knob to select “Voice
Recognize”, and then press the Control knob.
Turn the Control knob to select “Voice
Recognize”, and then press the Control knob.
3
Have the unit recognize your spoken name
Press the Control knob. If you hear a beep,
speak a registered name within 2 seconds.
Press the Control knob. If you hear a beep,
speak a registered name within 2 seconds.
4
Have the unit recognize the spoken category
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [DISP] button.
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [DISP] button.
5
Make a call
Press the Control knob.
Press the Control knob.
⁄
•
If your voice cannot be recognized, a message is displayed.
Refer to
Refer to
.
Pressing the Control knob allows you to retry voice input.
•
Both the name and category requires registration of a voice
tag. Refer to
tag. Refer to
Clearing the Disconnection message
KDC-X895
KDC-BT848U
Press the [ ] button.
KDC-X595
KDC-448U
Press the [LOG] button for at least 1 second.
“HF Disconnect” disappears.
“HF Disconnect” disappears.