ICOM f80s Manuale Utente

33

6

■Optional battery case (BP-237)

When using the optional battery case attached to the trans-
ceiver, install 6 

× AA (LR6) size alkaline batteries as illustrated

at right.

q Hook your finger under the latch, and open the cover in the

direction of the arrow (

q). (Fig.1)

w Then, install 6 

× AA (LR6) size alkaline batteries. (Fig.2)

• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.

e Close the cover by fitting in the direction of the arrow (

w)

first, then check the latch is in place (

e). (Fig.1)

• Be sure the gasket is set correctly, and do not protrude from the

battery case. (Fig.3)

CAUTION:
• When installing batteries, make sure they are all the same

brand, type and capacity. Also, do not mix new and old
batteries together.

• Keep battery contacts clean. It’s a good idea to clean bat-

tery terminals once a week.

q

e

Latch

w

Gasket

IC-F70_F80-1.qxd  05.1.18 4:26 PM  Page 33 (1,1)